CATEGORIES
CATEGORIES
Home > FAQ
 
< How Do I Setup My Epson Thermal Printer Model TM-T20II  |  How To Configure your Printer From The Front-End >
 
How Do I Setup My Epson Thermal Printer Model TM-T88V
 6/7/2015  by  Zephyr Support
  • Unbox the printer and components. The cd's are not needed as all drivers are built into Lavu.
  • Make sure the printer is turned off.  Then turn over.
  • Connect the power supply from the power outlet to the DC24V connection on the back of the printer.
  • Connect the Ethernet Cable from the router or switch to the 10 Base-T/100 Base-TX port on the back of the printer
  • Connect cash drawer to the DK port if applicable
  • Position the two hooks on both sides of the connector cover so that they hook the printer case.  Push the connector cover down to click onto the printer case.
  • Pass the cables through cable exits in the connector cover.  The connector cover has cable exits on the back and both sides.  You can also route cables out the front by passing them through the notch in the printer bottom.  If you want to pass the cable through the cable exit on the back, fit the cable under the hook on the printer to prevent the cable from coming off.  After the cable arrangement, turn over the printer, and make sure the cables are not pinched.
  • Press the cover open button to open the roll paper cover.  Insert the roll of paper according to the direction shown in the illustration below.  Pull out some paper, and close the roll paper cover.
  • Turn Printer Power on
< How Do I Setup My Epson Thermal Printer Model TM-T20II  |  How To Configure your Printer From The Front-End >
 
 
 
 
 
 
 

Look no further, the future is here. The iPad point of sale revolution is now. Cut the wires, throw away your expensive traditional POS terminal, remove the bulky back office server and lose the large monthly service contract that has tied down your business and caused you endless headaches.

Start taking orders today with POSLavu and Zephyr Hardware. POSLavu has built an iPad Point of Sale application for Apple iOS that is simple and efficient, mobile, smart and stylish, perfect for small and large businesses alike. Combine that application with Zephyr Hardware and you have a complete iPad Point of Sale system that you know will work.

iPad Point of Sale is perfect for coffee shop POS, restaurant POS, bar POS, food truck POS, fine dining POS.